Carle Kitchen Cabinets — Custom Case Study

Kitchen CabinetsNestled deep in Southwest Portland, the Carle family kitchen was the subject of an extensive remodel that was completed in late 2014. Interior designer Barbara Sumner and architectural designer Kristyn Bester worked with Versatile’s Product Designer Rex Vaccaro. Their job was to update and modernize the kitchen complete with stunning kitchen cabinets.

The design process for this particular project exemplifies our modern era. Most of the communication during the process happened via Skype since the Carle family had been residing in Amsterdam when the project began. As with any remodel project, the designers hit a few snags. The home was still under construction when the family returned to Portland. Ultimately, however, the Arciform and Versatile teams were able to achieve a contemporary, streamlined kitchen. A kitchen that is both functional and beautiful for the Carle family.

 

Kitchen Cabinets

What was the scope of the project and what were the design goals?

 For Versatile, the scope involved an entire run of custom upper and lower kitchen cabinets. As well as a pantry wall; a large kitchen island with a cantilevered eating area, and a built-in window bench. Some retrofit shelving and a wet bar in an adjacent living room were also included in the design. The finishes ended up being a contemporary mix of stainless steel-wrapped upper kitchen cabinets, paint grade surfaces for the pantry wall, and solid, clear, walnut grain aligned horizontally on the lower kitchen cabinets.

What challenges did the project face?

The biggest challenge that this project presented was the fact that the client had a strong desire for all of the lower kitchen cabinets to carry a visually  distinctive horizontal line from the wood grain along the length of the kitchen. The surface area along the sink wall and island was very broad. There was some difficulty in locating beautiful, solid pieces of walnut that were large enough to cover those surfaces. The main issue with long spans of wood, however, is that they will always warp over time. So there was an initial fear that the kitchen cabinet faces would warp and be ruined.

Carle_2003_Kitchen_A_P_Pro_ (9)

What were the Uniquely Versatile solutions?

The first step in solving the problem was to communicate with designers working on the project. With regards to the sink wall, the solution was to simply compromise on the pattern, and face the cabinets with a classic vertical grain rather than risk the possibility of warping. To create a horizontal appearance on the surface of the nine-foot long island, a laminating method was used. A few boards of walnut were glued together along their long edges in order to add stability.

Laminated wood still carries the possibility of warping. By alternating the grain patterns on the boards (essentially flipping every other board so that the grain pattern is opposite the one before it), more stability is added to the wood,  creating a preventive measure against warping. We were also able to retain the horizontal grain pattern that the client wanted, and applying these solutions to the project resulted in a stunningly beautiful set of kitchen cabinets.

Carle_2003_Kitchen_A_P_Pro_ (4)

Versatile is always looking to come up with inventive solutions for the challenges faced when collaborating with others. Our creative team worked with the talented designers at Arciform to achieve their client’s needs for this beautiful home in Southwest Portland.

About Versatile Wood Products | Contact Us

Mid-Century Custom Cabinetry — Custom Case Study

Mid-Century Custom Cabinetry

Mid-Century Custom Cabinetry for a Mid-Century Home

This architect designed mid-century modern home featured existing hemlock cabinets that needed restoration. Additionally the client wanted to expand square footage and increase the utility of the space for entertaining. Versatile refinished and modified the original kitchen cabinets to house new appliances. They also fabricated a new bank of cabinets that matched the existing style and hardware, concealed the new refrigerator and expanded the available storage.

Mid-Century Custom Cabinetry: Project Goals

To restore and expand the kitchen with as little impact to the original fixtures as possible while modernizing the appliances and integrating them into the existing architecture.

Mid-Century Custom Cabinetry

Mid-Century Custom Cabinetry: Challenges

  1. The unusual species of the wood in the existing architect-designed cabinets. These required an exact match of wood and hardware in order to blend the new elements seamlessly with the old.
  2. Integrating contemporary appliances into a space designed for the 1960s without distracting from the period style of the space. This requires extremely precise fits on the surrounding cabinets.

Mid-Century Custom Cabinetry

Mid-Century Custom Cabinetry: Uniquely Versatile Solutions

  1. Research of the architect’s work along with a deep understanding of the principals of the original architectural style helped identify creative but architecturally appropriate solutions to the integration challenges.
  2. Precise measurements and good communication with the contractor during the design of new cabinets ensured a seamless installation.

Client’s Reaction

We love our home and think often about the wonderful job you have done for us.

About Versatile Wood Products | Contact Us

Block House Café — Custom Case Study

 block house cafe

In the heart of historic Dayton Oregon, The Block House Café recently moved into the 1886 First Baptist Church on Main Street. Working alongside architect Paul Falsetto and Fackler Construction, Versatile created a large back bar with surrounding cabinetry, wait-station, and tabletops from old floor joists in the building.

Block House Café Goals:

To create a large, functional, and aesthetically pleasing back bar that hides the seismic bracing. Re-purpose original floor joists to create tabletops and a bar top.

 Block House Café

Block House Café Challenges:

The biggest challenge we faced with the back bar, which included 10’ high walnut pieces, was installation to conceal three alcoves that were created by updated seismic structuring. The tabletops and bar top proposed a few challenges. They were created from wood salvaged from the original floor joists from the building. We were concerned about the tabletops cupping or warping. We needed to create a flat, smooth surface on the bar top as there were many wormholes in the wood.

The Block House Café

Block House Café Uniquely Versatile Solutions:

We worked around installation problems of the bar by pre-building it in 3 separate pieces. Along with some tolerances to allow for variations in the walls when it was installed on site. The three pieces overlapped once installed to look like one piece of furniture while hiding the bracing behind.

To address the tabletops potentially warping, we added a dovetail key underneath to tie the planks together. By attaching the key to the middle plank only, the planks could expand and contract naturally, but not warp or cup. And finally, to create a smooth, flat surface on the bar top. The wormholes were filled with clear epoxy rather than a colored putty. Since the natural color of fir changes over time, the clear epoxy will make a smooth surface without worry that the wood color would ultimately shift away from the color of the putty. Versatile’s experience and expertise allowed us to anticipate potential issues and create solutions before they became real problems on site.

About Versatile Wood Products | Contact Us